Pack of 20 Sleeve Inserts for Shelf Supports peg 7.5mm Brass finish for adjustable shelves

Bulk Save

QtyPrice per itemSaving
1 £1.25 -
2 – 10 £1.19 5%
11 – 50 £1.13 10%
51 – 100 £1.06 15%
101 – 250 £1.00 20%
251 – 500 £0.94 25%
501 – 1000 £0.88 30%
1001 – 5000 £0.75 40%
5001 + £0.63 50%

Qty

Pack of 20 - 7.5mm Sleeve Inserts
for 7mm shelf support pegs
Steel with Brass finish

Hammer fit into 7.5mm hole

Load carrying capacity 100 kg
Load carrying capacity applies to 4 shelf supports bearing an evenly distributed load.
Testing was carried out according to DIN EN 1727 Mechanical safety requirements for shelf supports

Drill a series of vertical holes in the carcase sides
to enable height adjustment of the shelves

 

Related Products