Mirror Screws with polished Bronze Disc screw in Cap
pack of 4
Solid brass flat disc cap 20mm diameter
with bronze finish
The elegant way to fix your mirror
Choice of screw lengths and material available
Zinc plated 30mm (1") screws supplied if no selection made
Fix the mirror or display panel to the wall with the specially threaded mirror screws.
In order to prevent damage to the screw,
the screw should not be a tight fit in the hole
and the screwdriver should be a good fit in the screw.
Do not overtighten the screws.
Use flanged grommets (see below) to prevent the screws pressing directly on the glass
and to lift the mirror off the wall slightly, preventing distortion due to uneven walls.
Then screw in the decorative cover heads to conceal the screws.
Please select screw length and material
in drop down boxes below