TUTCH LATCH automatic spring catch
Pressure touch latch
The loft Hatch Latch Catch
Suitable also for Kitchen cabinet doors, wardrobes and bathroom cabinets.
No handles or knobs required so the doors can all be flush
Simple operation - push to open push to close.
Firmly holds the door closed.
Suitable for use in caravans, camper vans and trailers.
All fixings supplied.
How to fit the TUTCH LATCH automatic spring catch:
Position the catch 6mm back from the rear face of the door.
Mark the centres of the two slots
Drill a tiny pilot hole - just enough to get the screw started
(the screws supplied are not self starters so the pilot holes
will save a lot of frustration and prevent a positioning error)
Screw the latch into position.
Insert the 'Z' shaped marking jig as shown in the pictures
make sure it is level by pushing up the mechanism to support it
Push the door against the jig
This will mark the door with the position of the centre of the slotted hole
in the counter piece - Pilot drill this point.
Screw the counterpiece into position - relative position to latch shown in pictures.
Now close the door check the latch operates correctly
Adjust as necessary.
Now hammer in the two pins supplied into the small holes in the latch
just behind the fixing screws this will prevent any unwanted movement
Pilot and screw the other counterpiece screw
Do not over tighten any screws.