Click to enlarge
|
Pair of Straight Connector Plates
138mm x 19mm x 3mm thick
Bright Zinc Plated (BZP) steel strip
Four countersunk holes for M4 screws
Will also take M3.5 or M4.5
How to fit false drawer fronts:
These are very sturdy connector plates. They are most commonly used to attach
a false drawer front to a door where it would not be possible to have
a real drawer because of the sink. Also for joining multiple larder doors
so that they open together but maintain the line of doors when closed.
First screw the plates to the lower door.
Place spacers of the desired thickness (to maintain the same gap
as adjoining doors/drawers) on the top edge of the door.
Position the upper door/drawer front on top of the spacers and screw into position.
Remove spacers.
|
