|
An elegant Mirror Holder
with two frosted glass back plates
Available in Polished or Matt chrome (please select your choice of finish below)
Picture shows Matt version
The holder will take any size mirror but it is advisable not to fit too large a mirror
We recommend no larger than 45cm high x 35cm wide in 4mm or 6mm glass
Please ask your glass supplier to polish all the edges to remove sharp edges
and to foil back the mirror - this will protect the silvering from accidental damage
and prevent the mirror shattering dangerously in the event of breakage
the glass back plates are 8cm square
overall height is the same as the mirror you fit
protrusion from wall is 5.5cm
Very simple to fit requiring just four screws
a fixing kit is supplied with the Mirror Holder
Fitting tip - fit the mirror to the holder first then mark fixing positions
please ask somebody to help hold the mirror while you mark the hole positions
We also have the following matching items in the same range
60cm Towel Rail
45cm Towel Rail
Toilet Roll Holder
Single Robe Hanger
Toilet Brush
| Polished or Matt Chrome? | |
|
